Industrial oil and gas dual fuel burner：
Nowadays, oil and gas dual fuel burners are more and more widely accepted and applied. How much do you know about them?
Oil and gas dual-purpose burners are energy-saving burners developed by users who need to be supplemented by part of the fuel gas supply, and mixed or intermittently burned with fuel and gas. The burner is composed of a center oil gun and a multi-head internal mixing tube, which can be used for single fuel oil, single gas, and oil and gas mixed combustion.
Fuel system workflow: start the fuel pump-send power to the burner-switch to fuel gas-heat the heating barrel to the set temperature-start the blower to start purging-the solenoid valve sucks in the spray gun and the high-pressure ignition coil is energized ——Ignition——The burner works normally.
Gas system work flow: check natural gas-burner power supply-start burner-leak detection program controller work-blower start for purging-natural gas working valve open, high-pressure ignition coil is energized-ignition-combustion The device works normally.
The main components of the oil and gas dual-purpose combustor:
Fuel electric heating furnace barrel, high-pressure oil pump, wind plate, fan motor, proportional plate, high-pressure ignition coil, solenoid valve, spray gun, ignition needle, flame plate, photoelectric eye, RWF40, program controller, etc.
Performance characteristics:
1. The basic structure is composed of multiple internal mixing gas pipes and an oil gun located in the center of the combustion chamber. The internal mixing pipe is used for mixing gas and fuel when gas is used, and is also used for supplying primary gas when fuel is used, so that the entire combustion The device is simplified to a single oil burner, and it only needs to be supplied with a gas source when gas is needed.
2. The automatic control system can be designed according to the user's needs, such as segment fire type, air door adjustment proportional type, frequency conversion adjustment proportional type, touch screen digital control, industrial computer frequency conversion adjustment proportional type and other control methods.
3. Oil types: residual oil, heavy oil, light oil, crude oil; gas is natural gas, coal gas and other combustible gases.
4. Configure functions such as flameout protection, program ignition, leak detection, over-temperature, over-pressure protection, etc. according to user needs. In addition to automatic control, it can also be operated manually.
5. It can realize the supplementary adjustment of fuel oil and gas in any proportion.
The oil-gas dual-purpose burner is a combination of an oil burner and a gas burner. Just like a conjoined person, there are separate places and some useful places, relying on a switch to change the type of fuel; the adjustment is similar to two burners, as long as the fuel part and the gas part are adjusted separately.