Biomass Pellet Burner Used for Dryers and Boilers Equipment
Biomass pellet burners are used in dryers and boiler equipment. The pellet burners are used with hot air stoves to provide hot air or heat source for the dryers. There are two types of biomass burners, one is to burn particles to generate heat, and the other is to burn biomass particles to generate biomass gas. There are two types of biomass fuel gas: one uses biomass as a raw material, which causes incomplete combustion and pyrolysis of biomass under high temperature and oxygen-deficient conditions to produce combustible gas, the main components of which are CO, H2, N2, etc.; It uses biomass as raw material and is used by anaerobic bacteria to produce biogas under anaerobic conditions. The main components are CH4 and CO2. Biomass fuel does not contain sulfur and phosphorus, does not corrode furnaces and smoke pipes, and can prolong the service life of furnaces and kilns. Enterprises will benefit greatly. When biomass fuel is burned, it does not produce sulfur dioxide and phosphorus pentoxide, so it does not cause acid rain, does not pollute the atmosphere, and does not pollute the environment
The biomass pellet burner hot blast stove adopts the reverse combustion technology. The main working principle of the reverse combustion technology is that the combustion of coal produces high-temperature flue gas in the furnace. Under the suction effect of the chimney, the flame will burn down and enter the smoke ring. The pipe is discharged from the chimney through the flue. The use of the reverse combustion technology of the dry hot air stove guarantees the full burnout of the fuel and greatly reduces the emissions of smoke, sulphur dioxide and other gases. It can achieve the effect of smoke removal, dust removal and desulfurization without installing dust removal equipment, and meet the national environmental protection emission standards.