Monoblock hot air generators burner nature gas and light oil steam burner

  News     |      2021-03-30 14:42


Monoblock burner:
 
Monoblock burner electronic ratio adjustment, precise control, improve combustion efficiency.
 
The PID logic controls the air-fuel ratio, the air volume and the air volume follow-up are very accurate, and the ignition ratio is adjusted to 5:1.
 
The fan is specially equipped with VFD frequency converter, which can save 35%-85% of electric energy. 
 
Scope of application: Suitable for gas-fired boilers with a power of 0.7MW-7MW.
 
The monoblock structure and monoblock control panel save installation space and facilitate disassembly and maintenance.

 
The NOx emission is stable less than 30mg/m2. The blue flame, the flame height is 15 cm, and the temperature is uniform, which can protect the life of the boiler.
 
Combustor is a general term for devices that make fuel and air spray mixed and combust in a certain way. Burners are classified into industrial burners, burners, civil burners, and special burners according to their types and application fields. It is mostly made of corrosion-resistant and high-temperature resistant materials such as stainless steel or metallic titanium. The function of the burner is to atomize the sample through flame combustion. The atomized test solution enters the burner. Under the action of flame temperature and flame atmosphere, through processes such as drying, melting, evaporation, and dissociation, a large number of ground state atoms, as well as some excited state atoms, ions and molecules, are produced.
 
A well-designed burner should have high atomization efficiency, low noise, and stable flame performance to ensure high absorption sensitivity and measurement precision. A slit burner is commonly used in atomic absorption spectroscopy to generate atomic vapor. Depending on the type of gas and auxiliary gas used, the length and width of the burner gap are different. Generally, the burner is marked with applicable gas and auxiliary gas.
 
 

HOT PRODUCT


Message Feedback