In the process of using biomass burners, various problems will be encountered. Among them, the reduction of the extinguishing rate of biomass burners is a very common problem worthy of consideration. If the extinguishing rate of biomass burners is reduced, it will As a result, the heat generated by it will not meet the demand, and biomass fuel will be wasted.
The biomass extinguishing machine uses special biomass pellet fuel. This biomass pellet fuel is produced by a series of processing and consumption from leftover wood materials of agriculture and forestry, such as straw, waste wood, and wood chips. Low-carbon and environmentally friendly renewable resources, and the use cost is much lower than coal, petroleum, natural gas and other energy sources. Biomass pellet fuel has the advantages of low carbon, environmental protection, low cost, and energy saving. Therefore, the quality of biomass pellets The extinguishing rate of the extinguishing machine has a serious impact. If the biomass pellet fuel of poor quality is purchased, it will directly affect the extinguishing rate of the biomass extinguishing machine. In addition, it cannot be due to consumption during the operation and use of the biomass extinguishing machine. The increase in the amount of biomass will lead to excessive feeding into the biomass extinguishing machine. If the amount of biomass pellet fuel input exceeds the capacity of the biomass extinguishing machine rule, the extinguishing rate of the biomass extinguishing machine will be reduced. Therefore, in order to prevent biomass The extinguishing machine presents a problem that the extinguishing rate decreases.
1. When purchasing a biomass extinguishing machine, you must choose the right manufacturer to consume it to ensure that the quality of the biomass extinguishing machine is qualified. The next step is to purchase biomass pellet fuel. Biomass pellet fuel is a consumable product. In the early stage, we will not distinguish between the quality of biomass pellet fuel. First, buy some for experimentation. If the effect is good, you can purchase in large quantities. Before you buy, understand the reputation of the biomass pellet fuel and purchase good quality biomass pellet fuel. Ensure that the fuel rate of the biomass extinguisher meets the standard.
2. If the extinguishing rate of the biomass extinguishing machine is found to be reduced during operation, check whether the fire port can be blocked. If an infarction is found, stop the liquidation immediately. Pay attention to frequent cleaning and inspection during daily maintenance. Pay attention to the records of various problems in order to avoid recurrence.
3. Carefully check the vents of the equipment. If the wind speed of the vents is too large or too small, and the bottom wind is not even, the fuel rate of the biomass extinguishing machine will decrease. After the inspection, if an abnormality is found, it should be operated in time according to the actual conditions. The standard adjusts the ventilation rate to a correct range.
