Operating process of small light oil burner
Timing starts when the burner electricity, wind the opportunity to drive the impeller work (as a result of the impeller and the pump motor is through the shaft coupling, so the motor impeller and the pump will continue to work at the same time the work of), it is purging stage, for purging 15 seconds after arrived at 16 seconds, the ignition transformer to start working, the ignition transformer electric spark in the burner head (the igniter will continue to work after 2 seconds off), oil solenoid valve will start work within 16.5 second (open, through oil oil to the nozzle), the oil jet (small model machine is using a mechanical atomizing, the burner head is a similar shower shower nozzle,At the same time, the photosensitive resistance near the nozzle also starts to work, detecting the formation of light source (refers to flame).
(1) form a stable flame: then the burner works normally, except the ignition transformer all accessories will continue to work.
(2) no flame: the photosensitive resistor will instantly transmit the information to the program controller, the program controller will cut off the burner's power supply, all stop working.
