The shell of the burner accessories is made of aluminum alloy by die-casting material, and made into various types of shells. Because of the convenient processing, high flexibility and high grade, it can effectively increase the added value of the product and can be widely used in the electronics industry. Including aluminum profile shell and aluminum die-cast shell. Regarding the advantages of using aluminum housing, the main ones are:
1. Easy processing After adding certain alloy elements, cast aluminum alloy with good casting performance or deformed aluminum alloy with good processing plasticity can be obtained. Second, the burner has good electrical and thermal conductivity. The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. Low density The density of aluminum and aluminum alloy is close to 2.7g/, which is about 1/3 of iron or copper.
4. The burner has high strength. Aluminum and aluminum alloy have high strength. After a certain degree of cold working, the strength of the matrix can be strengthened, and some aluminum alloys can also be strengthened by heat treatment.
5. Good corrosion resistance The surface of aluminum is easy to naturally produce a dense and firm AL2O3 protective film, which can protect the substrate from corrosion. Through artificial anodic oxidation and coloring, cast aluminum alloy with good casting performance or deformed aluminum alloy with good processing plasticity can be obtained.
When choosing the casing of the burner, you must choose a good quality, otherwise not only the safety will be affected, but also the failure may occur during use, so special attention is required.
