LOA series fuel burner controller

  Parts     |      2020-08-07 16:27
LOA series fuel burner controller
Technical performance and structural characteristics:
 
The mechanical combustion controller monitors, starts, and controls the oil burner (less than 30Kg/h) with intermittent operation of single-stage or double-stage forced ventilation.
 
The yellow flame uses QRB... flame detector.
 
The blue flame uses QRC... flame detector. .
 
Installation Precautions:
 
1. The controller unit and other cables must be installed separately from the high-voltage ignition cables.
 
2. Don't confuse the phase line and the neutral line
 
3. The installation of switches, fuses, grounding, etc. must comply with local regulations
 
4. It must be confirmed that the maximum current allowed by the terminal is not exceeded
 
5. Do not provide external main voltage to the control output of the combustion controller
 
6. Use an all-polar switch to isolate the combustion controller from the mains power supply, leaving at least a 3mm contact gap
 
7. Use a metric screw and loose washer to protect the grounding sleeve under the chassis

HOT PRODUCT


Message Feedback