Eclipse ThermJet High Speed Burners

 Other Burners     |      2021-07-06 11:51
High-speed burner
Eclipse High-speed burners are used in tempering furnaces, hardening furnaces, fluid bed furnaces, thermal oxidation furnaces, zinc/aluminum melting furnaces, small glass furnaces, trolley furnaces, environmental protection industries, and can use preheated air!
The ThermJet high-speed burner can completely burn the fuel with super high heat load. The volume of the combustion chamber of the burner itself is small, and the fuel can be basically completely burned in it, so the volume heat intensity of the combustion chamber is very high. At the same time, due to the high flow rate of the combustion gas, the convective heat transfer can be enhanced, and the uniformity of the furnace temperature can be improved. Studies have shown that when the furnace temperature is between 850 and 1150°C, the temperature difference is 7°C. The atmosphere in the furnace is easy to adjust to oxidizing or reducing, and stable combustion can still be achieved when the excess air coefficient is high. The excess air volume can reach 50.0, which is much higher than the 2.5 of ordinary burners. The combustion air temperature of the high-speed burner can be adjusted freely within the range of 200~1800℃ (excess air coefficient α is between 1~50) by adjusting the primary and secondary air and gas volume, so that the high-speed burner can adapt to various kilns. To improve the quality and output of products, high-speed burners can expand the scope of use of kilns.